Embedded system Training


Greens Technology's Embedded system training in Chennai located in Adyar, OMR, Tambaram and Annanagar to freshers and Working professionals. Learn Embedded system from the Best Embedded system Training Institute in Chennai with certification and Job placements.


About The Trainer

- Dinesh has over 11 years of Embedded experience and recognized expert in as an Architect for Automation as Principal Consultant

In my career of over 11 years, I have been working in Matlab, Embedded systems and IoT and Developed innovative mobile solutions with iPhone Objective-C, C, UIKit, Xcode, IOS4, IOS5, JSON, AVFoundation, Quartz core and SQLite Objective.

Flexible Timings / Weekend classes Available.

Talk to the Trainer @ +91-8939915577

Embedded systems Training in Chennai


Greens Technology is a leading provider of Embedded systems Training in Chennai is intended to introduce students to the design and analysis of computational systems which interact with physical processes.


Embedded Systems Course Syllabus



Certified Embedded Engineer [ 15 Days ]


Module 1: Embedded System Introduction


  • Introduction about PLDs
  • Introduction about Microprocessors
  • Introduction about Signal processing and Data processing
  • Introduction about Micro controllers
  • Microcontroller classifications
  • Introduction about 8051 Microcontroller
  • Introduction about ARM Controllers

Module 2: Application Development


  • Introduction about 805X and Interface
  • Introduction to Advance RISC Machine

Module 3: Language and Tools


  • Introduction to Embedded C programming
  • Intro about KEIL IDE

Embedded Systems Programmer [30 Days]


Module 1: Embedded System Introduction


  • Introduction to PLDs
  • Introduction to Microprocessors
  • Introduction to Signal processing and Data processing
  • Introduction to Mixed signal Processing
  • Introduction to Micro controllers
  • Microcontroller classifications
  • Introduction to 8051 Microcontroller
  • Introduction to PIC Microcontrollers
  • Introduction to MSP430 Microcontroller
  • Introduction to ARM Controllers
  • Introduction to System On Chip(SoC)

Module 2: Application Development on 8051


Applications using External Peripherals

  • Interfacing of LEDs
  • Interfacing seven segment display,
  • Interfacing of LCD
  • Matrix Key-pad scanning
  • I2C device Interfacing.
  • External RTC
  • External EEPROM

Module 3: Application Development on ARM-7


Internal Peripheral Applications

  • Introduction to Advance RISC Machine
  • JTAG
  • SPI
  • UART
  • I2C
  • PWM
  • Vectored Interrupts
  • On-Chip ADC/DAC
  • RTC

Module 4: Language and Tools


  • Introduction to Embedded C programming
  • Data types, Qualifiers and Operators
  • Loop control and Functions
  • Array, Strings and Classes
  • Pointers and Structures
  • Arithmetic operations, and Type casting,
  • Call by Value, Call by Reference and Dynamic memory allocation.
  • Intro to KEIL IDE
  • Servo motor Drive Interface
  • Stepper Motor Drive Interface
  • Interfacing of LCD Interface
  • Interfacing of LEDs Interface
  • Matrix Key-pad Interface

Embedded Application Development Engineer [45 Days]


Module 1: Embedded System Introduction


  • Introduction to PLDs
  • Introduction to Microprocessors
  • Introduction to Signal processing and Data processing
  • Introduction to Mixed signal Processing
  • Introduction to Micro controllers
  • Microcontroller classifications
  • Introduction to 8051 Microcontroller
  • Introduction to PIC Microcontrollers
  • Introduction to MSP430 Microcontroller
  • Introduction to ARM Controllers
  • Introduction to System On Chip(SoC)

Module 2: Application Development on 8051


Applications using Internal Peripherals

  • Architecture
  • Memory
  • Addressing Modes
  • Instruction set
  • Timers/Counters
  • Stop watch
  • UART

Applications using External Peripherals

  • Interfacing of LEDs
  • Interfacing seven segment display
  • Interfacing of LCD
  • Matrix Key-pad scanning
  • I2C device Interfacing.
  • External RTC
  • External EEPROM

Module 3: Application Development on ARM-7


Internal Peripheral Applications

  • Introduction to Advance RISC Machine
  • JTAG
  • SPI
  • UART
  • I2C
  • PWM
  • Vectored Interrupts
  • On-Chip ADC/DAC
  • RTC

Module 4: Language and Tools


  • Introduction to Embedded C programming

  • Data types, Qualifiers and Operators
  • Loop control and Functions
  • Array, Strings and Classes
  • Pointers and Structures
  • Arithmetic operations, and Type casting,
  • Call by Value, Call by Reference and Dynamic memory allocation

  • Intro about KEIL IDE
  • Servo motor Drive Interface
  • Stepper Motor Drive Interface
  • Interfacing of LCD Interface
  • nterfacing of LEDs Interface
  • Matrix Key-pad Interface

Module 5: Real Time Operating System


  • Define Real Time Operating Systems (RTOS)
  • Comparison between normal (traditional) OS and Real Time OS
  • Why RTOS is required in Embedded systems

Post Graduate Diploma In Embedded Systems [60 Days]


Module 1: Embedded System Introduction


  • Introduction to PLDs
  • Introduction to Microprocessors
  • Introduction to Signal processing and Data processing
  • Introduction to Mixed signal Processing
  • Introduction to Micro controllers
  • Microcontroller classifications
  • Introduction to 8051 Microcontroller
  • Introduction to PIC Microcontrollers
  • Introduction to MSP430 Microcontroller
  • Introduction to ARM Controllers
  • Introduction to System On Chip(SoC)

Module 2: Application Development on 8051


Applications using Internal Peripherals

  • Architecture
  • Memory
  • Addressing Modes
  • Instruction set
  • Timers/Counters
  • Stop watch
  • UART

Applications using External Peripherals

  • Interfacing of LEDs
  • Interfacing seven segment display,
  • Interfacing of LCD
  • Matrix Key-pad scanning
  • I2C device Interfacing.
  • External RTC
  • External EEPROM

Module 3: Application Development on ARM-7


Internal Peripheral Applications

  • Introduction to Advance RISC Machine
  • JTAG
  • SPI
  • UART
  • I2C
  • PWM
  • Vectored Interrupts
  • On-Chip ADC/DAC
  • RTC

External Peripheral Applications

  • Interfacing Relay
  • Interfacing Buzzer
  • Interfacing pushbuttons
  • Power electronics drives control
  • DC motor Drive
  • Servo motor Drive
  • Stepper Motor Drive
  • Sensors

Module 4: Language and Tools


  • Introduction to Embedded C programming
  • Data types, Qualifiers and Operators
  • Loop control and Functions
  • Array, Strings and Classes
  • Pointers and Structures
  • Arithmetic operations, and Type casting,
  • Call by Value, Call by Reference and Dynamic memory allocation

  • Intro to KEIL IDE
  • Servo motor Drive Interface
  • Stepper Motor Drive Interface
  • Interfacing of LCD Interface
  • Interfacing of LEDs Interface
  • Matrix Key-pad Interface

Module 5: Real Time Operating System


  • Define Real Time Operating Systems (RTOS)
  • Comparison between normal (traditional) OS and Real Time OS
  • Why RTOS is required in Embedded systems
  • How RTOS helps to increase the scalability
  • Basic architecture
  • Types and features
  • Hard time systems
  • Real time kernels
  • Multitasking techniques
  • Time and memory management
  • Real time scheduling.

Embedded system Training Course description


In this Embedded system Training Course in Chennai, the fundamentals of embedded system hardware and firmware design will be explored. Issues such as embedded processor selection, hardware/firmware partitioning, glue logic, circuit design, circuit layout, circuit debugging, development tools, firmware architecture, firmware design, and firmware debugging will be discussed. With personal hands-on Embedded system training in Chennai, and optional follow-up mentoring, you can guarantee that your Embedded system course in Chennai investment provides the maximum benefit with Jobs and Certifications.


Embedded system Training in Chennai Benefits


1) Two days free trial - If candidate likes this Embedded system course, these days are adjusted in his actual schedule.

2) Live Project Exposure of Fortune companies.

3) Training by Subject Matter experts from CMM Level 5 companies from Chennai, Noida, Mumbai, Hyderabad, Bangalore and Pune

4) Running in two major financial cities of India – Chennai and Bangalore

5) Worldwide online training of Embedded system classes at affordable fees.

6) Our basic course worth more than the Embedded system advanced course of other institutes/freelancers.

7) Free Interview preparations.

8) 100% free assistance for Embedded system certifications.

9) 100 % guarantee in succeeding the certification at affordable fees.

10) Also provide online training to students of foreign countries.


Embedded system Certification training in Chennai


UML 2.5x (OCUP 2), BPMN 2 (OCEB 2), MBSE (OCSMP), and Real-time and Embedded (OCRES) Certifications


What are the Prerequisites for this Embedded system course?


Strong basis of digital electronics, basic computer engineering, strong computer architecture, communication systems, assembler language, Ansi C language.


iot training chennai

About Embedded system


If we look around, we will find ourselves to be surrounded by computing systems. Every year millions of computing systems are built destined for desktop computersEmbedded Systems (Personal Computers, workstations, mainframes and servers) but surprisingly, billions of computing systems are built every year embedded within larger electronic devices and still goes unnoticed. Any device running on electric power either already has computing system or will soon have computing system embedded in it.

Today, embedded systems are found in cell phones, digital cameras, camcorders, portable video games, calculators, and personal digital assistants, microwave ovens, answering machines, home security systems, washing machines, lighting systems, fax machines, copiers, printers, and scanners, cash registers, alarm systems, automated teller machines, transmission control, cruise control, fuel injection, anti-lock brakes, active suspension and many other devices/ gadgets.

A precise definition of embedded systems is not easy. Simply stated, all computing systems other than general purpose computer (with monitor, keyboard, etc.) are embedded systems.

System is a way of working, organizing or performing one or many tasks according to a fixed set of rules, program or plan. In other words, an arrangement in which all units assemble and work together according to a program or plan. An embedded system is a system that has software embedded into hardware, which makes a system dedicated for an application (s) or specific part of an application or product or part of a larger system. It processes a fixed set of pre-programmed instructions to control electromechanical equipment which may be part of an even larger system (not a computer with keyboard, display, etc).

A general-purpose definition of embedded systems is that they are devices used to control, monitor or assist the operation of equipment, machinery or plant. “Embedded” reflects the fact that they are an integral part of the system. In many cases, their “embeddedness” may be such that their presence is far from obvious to the casual observer.

An embedded system is an engineering artefact involving computation that is subject to physical constraints (reaction constraints and execution constraints) arising through interactions of computational processes with the physical world. Reaction constraints originate from the behavioural requirements & specify deadlines, throughput, and jitter whereas execution constraints originate from the implementation requirements & put bounds on available processor speeds, power, memory and hardware failure rates. The key to embedded systems design is to obtain desired functionality under both kinds of constraints.


Applications of Embedded System Based Real-Time Projects


Embedded systems have a vast variety of application domains that varies from low cost to high, consumer electronics to industrial equipments, entertainment devices to academic equipments and medical instruments to weapons and aerospace control systems. The applications of embedded systems include home appliances, office automation, security, telecommunication, instrumentation, entertainment, aerospace, banking and finance, automobiles personal and in different embedded systems projects.


1. Embedded System for Detecting Rash Driving on Highways

The main intention of this project is to design a highway speed-checker device that identifies rash driving on highways and alarms the traffic authorities if the speed checker finds any vehicle violating the set speed limits on highways.


2. Application of Embedded System for Street Light Control

The main intention of this Embedded Systems course in chennai is to detect the movement of vehicles on highways and to switch on street lights ahead of it, and then to switch off the street lights as the vehicle go past the street lights to conserve energy. In this project, a PIC microcontroller is programmed by using embedded C or assembly language.


3. Embedded System for Traffic Signal Control System

The main goal of this project is to design a density based traffic signal system. At every junction, the signal timing changes automatically according to the traffic density at every junction. Traffic jam is a major problem in many cities across the world and gives regular nightmares to the commuters and travelers .


4. Application of Embedded System for Vehicle Tracking

The main purpose of this project is to find the exact location of a vehicle by using a GPS modem and in order to reduce vehicle thefts. The GSM modem sends an SMS to a predefined mobile which stores the data in it. An LCD display is used to display the location information in terms of latitude and longitude values. The microcontroller (AT89C52) is pre programmed with the Keil software and therefore, continuously checks the GPS modem.


5. Embedded System for Auto Intensity Control

This project is designed to auto intensity control of LED based street lights by using solar power from the photovoltaic panels. The awareness for solar energy is increasing, and many institutions and peoples are opting solar energy. In this project, Photovoltaic panels are used for charging batteries by converting the sun energy into electrical energy. A solar charge controller circuit is used to control the charging.


6. Application of Embedded System for Home Automation System

The main purpose of this project is to design a home automation system with the Android application based remote control. Remote operation is performed by Android OS based smart-phone or Tablet etc., upon a Graphical User Interface based touch screen operation. In order to achieve this, Android application act as a transmitter, that sends on/off commands to the receiver wherein loads are connected.


7. Embedded System for Industrial Temperature Control

The main intention of this industrial temperature controller project is to control the temperature of any device in any industrial application according to its necessity. An LCD display is used to display the temperature in the range of –55°C to +125°C. The heart of the circuit is the microcontroller which is from 8051 families and controls all its functions.


8. Application of Embedded System for War Field Spying Robot

The main goal of this project is to design a robotic vehicle using RF technology for remote operation and attached with wireless camera for monitoring purpose. The robot with camera can wirelessly transmit real-time video with night vision capabilities. This type of robot can be helpful for spying purposes in war fields. An 8051 series of microcontroller is used for the desired operation.


Some More Embedded System Based Real-Time Project Ideas

Embedded systems are found in numerous applications and these systems use different electronic components in combination with computer network systems to get control of several equipments. Embedded system consists a single-chip microprocessor or microcontroller that acts as the central control to the interfaced peripheral devices.


Some more projects on advanced project ideas over a well- known applications of embedded systems are given below. All these projects in embedded systems are real time based projects that relates to both industrial and home areas. Therefore, the below list provides the embedded systems project ideas for ECE students.


  1. Speed Control Unit Designed for a DC Motor
  2. Thyristor Power Control with IR Remote
  3. Three Phase Solid State Relay with ZVS
  4. Auto Power Supply Control from 4 Different Sources: Solar, Mains, Generator &Inverter to ensure No Break Power
  5. Thyristor Controlled Power for Induction Motor
  6. Lamp Life Extender by ZVS (Zero Voltage Switching)
  7. Industrial Power Control by Integral Cycle Switching without Generating Harmonics
  8. Industrial Battery Charger by Thyristor Firing Angle Control
  9. Object Counter with 7 Segment Display
  10. Ultra Fast Acting Electronic Circuit Breaker
  11. Automatic Plant Irrigation System on Sensing Soil Moisture Content
  12. Precise Illumination Control of Lamp
  13. Automatic Wireless Health Monitoring System in Hospitals for Patients
  14. Speed Synchronization of Multiple Motors in Industries
  15. Applications of embedded systems in robotics
  16. PC Controlled Scrolling Message Display for Notice Board
  17. Touch Screen Based Industrial Load Switching
  18. RF Controlled Robotic Vehicle with Laser Beam Arrangement
  19. Power Saver for Industries & Commercial Establishments
  20. Auto Metro Train to Shuttle between Stations
  21. Automatic Bell System for Institutions
  22. CellPhone Operated Robotic Vehicle
  23. Density based Traffic Signal System using PIC Microcontroller
  24. Energy Meter Billing with Load Control over GSM with User Programmable Number Features by PIC Microcontroller


Embedded system training in Chennai Reviews


Greens Technology Reviews given by our students already completed the training with us. Please give your feedback as well if you are a student.


Embedded system Placement Training in Chennai


  • More than 2000+ students Trained
  • 95% percent Placement Record
  • 960+ Interviews Organized

Embedded system training Locations in Chennai


Our Embedded system Training centers


  • Adyar
  • Ambattur
  • Adambakkam
  • Anna Nagar
  • Anna Salai
  • Ashok Nagar
  • Choolaimedu
  • Chromepet
  • Ekkattuthangal
  • Guindy
  • Kodambakkam
  • Madipakkam
  • Mylapore
  • Porur
  • Saidapet
  • T. Nagar
  • Tambaram
  • Vadapalani
  • Velachery
  • Villivakkam
  • Virugambakkam

Embedded system training batch size in Chennai


Regular Batch ( Morning, Day time & Evening)


  • Seats Available : 8 (maximum)

Weekend Training Batch( Saturday, Sunday & Holidays)


  • Seats Available : 8 (maximum)

Fast Track batch


  • Seats Available : 5 (maximum)

Embedded system Training Venue:

Are you located in any of these areas - Adyar, Mylapore, Nandanam, Nanganallur, Nungambakkam, OMR, Pallikaranai, Perungudi, Ambattur, Aminjikarai, Adambakkam, Anna Nagar, Anna Salai, Ashok Nagar, Besant Nagar, Choolaimedu, Chromepet, Medavakkam, Porur, Saidapet, Sholinganallur, St. Thomas Mount, T. Nagar, Tambaram, Teynampet, Thiruvanmiyur, Thoraipakkam,Vadapalani, Velachery, Egmore, Ekkattuthangal, Guindy, K.K.Nagar, Kilpauk, Kodambakkam, Madipakkam, Villivakkam, Virugambakkam and West Mambalam.

Our Adyar office is just few kilometre away from your location. If you need the best RPA training in Chennai, driving couple of extra kilometres is worth it!




Testimonials
best RPA training center in chennai "I want to thank you for your incredible efforts and sharing your vast knowledge. I am feeling lucky to have attended your great batch. You are awesome Karthik, I am not sure when i will be able to attain 50% of your knowledge but i got a lot inspired by you. I will keep in touch and will always try to learn from you as much as I can. Thanks once again Karthik"

RPA training chennai ""Dear Karthik, RPA training has been outstanding. You have covered every aspect of the RPA which would boost the confidence of the attendee to dive into greater depths and face the interviews subsequently. I feel confident after attending the RPA course. I am sure you would be providing us your valuable high level guidence in our initial realtime project . Each of your session is a eye opener and it is a great joy to attend your RPA training. Thanks and Kindest Regards ""

RPA training classes in chennai "I thought I knew RPA until I took this course. My company sent me here against my will. It was definitely worth and I found out how many things I was doing wrong. Karthik is awesome. but i got a lot inspired by you. I will keep in touch and will always try to learn from you as much as I can. Thanks once again Karthik"

Greens Technologys Overall Reviews


Greens Technologys Overall Reviews 5 out of 5 based on 17981 ratings. 17981 user reviews.
RPA training chennai """I think this is the best RPA course I have taken so far..Well I am still in the process of learning new things but for me this learning process has become so easy only after I joined this course..as Sajin is very organized and up to the point.. he knows what he is teaching and makes his point very clear by explaining numerous times. I would definitely recommend anyone who has any passion for Cloud.." ""